Product Features

  • Valve Regulated Lead Acid (VRLA) design
  • AGM Absorbent Glass Mat technology, maintenance-free with up to 99% gas recombination efficiency
  • Pure lead construction with proprietary element formulation
  • Developed for high-rate UPS and float charge backup power applications
  • Manufactured to IEC 60896-21/22:2004 and UL1989 certified (MH14533)

Application Scenarios

  • Data center UPS long-duration backup power
  • Backup power solution for large equipment rooms requiring extended power supply
  • Long-duration discharge backup support in industrial UPS systems
  • Long-duration backup power applications in the financial sector
  • Long-duration backup power for telecom hubs
  • UPS long-duration power configuration for medical centers

Product parameters

  • Model:XPL2200
  • Voltage:12 Vdc
  • Nominal Capacity:2200W @5min-rate
  • Watts per Cell:563.00 (30-Sec 1.67 VPC @ 25°C)
  • Watts per Cell:366.17 (5-Min 1.67 VPC @ 25°)
  • Watts per Cell:201.50 (15-Min 1.67 VPC @ 25°)
  • Max. Charge Current:18.30 A
  • Max. Discharge Current:500 A
  • Short Circuit Current:1344 A
  • Internal Resistance:5.60 mΩ
  • Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:16.65 / 36.70 kg / lb.
  • Length (L):228.0±2.5 / 8.98±0.10 mm / in
  • Width (W):138.4±1.5 / 5.45±0.06 mm / in
  • Height (H):206.3±2.5 / 8.12±0.10 mm / in
  • Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

Under the CSB brand, the XPL2200 belongs to the XPL series. It is a 12V top-terminal valve regulated sealed lead acid battery that combines AGM technology with a pure lead plate structure. This series was developed for long-duration backup power applications requiring high-capacity single cells, and its officially designated use is data center uninterruptible power supplies. At an ambient temperature of 25°C, this battery has a nominal capacity of 2200W @5min-rate; its single-cell power performance is as follows: 563.00 W/cell at 30 seconds and 1.67 VPC, 366.17 W/cell at 5 minutes and 1.67 VPC, and 201.50 W/cell at 15 minutes and 1.67 VPC. In terms of electrical specifications, the XPL2200 can withstand a maximum charge current of 18.30 A, a maximum discharge current of 500 A, and a short-circuit current of 1344 A, with a measured internal resistance of 5.60 mΩ. The float charge voltage range is 13.5 to 13.8 Vdc/battery (25°C), and the equalization charge voltage is 14.4 to 15.0 Vdc/battery (25°C). The terminal uses an I2 threaded lead alloy material, accommodates M6 bolts, and requires a tightening torque of 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.1±1.0 N∙m. Dimensions and weight: the XPL2200 is 228.0±2.5 mm long, 138.4±1.5 mm wide, and 206.3±2.5 mm high, weighing 16.65 kg (36.70 lb). The case is made of PP (UL 94-HB), and a flame-retardant (94-V0) version is also available on request. Regarding service life, it can last 10 years in float charge standby mode at 25°C and meets the Eurobat (20°C) long life classification of greater than 12 years. Temperature adaptability: nominal temperature 25°C; discharge range -15°C to 50°C; charging and storage must be between -15°C and 40°C. Self-discharge characteristics: when stored at 25°C for 90 days, self-discharge is less than 10%; maximum storage is 6 months, which can be extended to 10 months with equalization charging. The battery should be fully charged before use; when storage temperature exceeds 25°C, charging should be moved up accordingly. The XPL2200 achieves 99% gas recombination efficiency through valve regulated sealed lead acid design and AGM technology, requiring no maintenance. Its pure lead construction and proprietary element formulation are designed specifically for high-rate UPS and float charge backup power applications. Production follows IEC 60896-21/22:2004 and it holds UL1989 certification (MH14533).
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...