Product Features

  • Valve Regulated Lead Acid (VRLA) battery
  • Maintenance-free, with gas recombination efficiency up to 99% thanks to Absorbent Glass Mat (AGM) technology
  • Pure lead construction with proprietary element formulation
  • Purpose-built for high-rate UPS and float charge backup power applications
  • Manufactured to IEC 60896-21/22:2004 and UL1989 recognized (MH14533)

Application Scenarios

  • Used as backup power for UPS in large data centers
  • Provides backup for high-voltage DC systems in cloud computing centers
  • Uninterruptible power support for financial trading systems
  • Emergency power assurance for UPS in telecom hubs
  • High-power backup solution for UPS in industrial automation
  • Backup support for UPS in rail transit signal systems

Product parameters

  • Model:HRL12330WG
  • Voltage:12 Vdc
  • Nominal Capacity:330W @ 15min-rate (1.67C) 100AH@ 20hour-rate (1.75V)
  • Watts per Cell:627 (5-Min 1.67 VPC @ 25°)
  • Watts per Cell:356 (15-Min 1.67 VPC @ 25°)
  • Max. Charge Current:33.0A
  • Max. Discharge Current:800 A
  • Short Circuit Current:2386 A
  • Internal Resistance:3.50 mΩ
  • Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.10±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:29.60 / 65.24 kg / lb.
  • Length (L):324.7±2.5 / 12.78±0.10 mm / in
  • Width (W):169.0±2.0 / 6.65±0.08 mm / in
  • Height (H):213.6±2.5 / 8.41±0.10 mm / in
  • Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB HRL12330WG belongs to the HRL series of 6V and 12V top terminal Valve Regulated Sealed Lead Acid batteries. With Absorbent Glass Mat (AGM) technology, it achieves a gas recombination efficiency of 99% and is maintenance-free. This model has a rated voltage of 12 Vdc, a 20-hour rate (1.75V) nominal capacity of 100Ah, a 15-minute rate power of 330W (1.67C), a 5-minute rate power of 627 W/cell, and a 15-minute rate power of 356 W/cell. The pure lead construction combined with a proprietary formula makes it suitable for high rate UPS and float backup power. Electrically, the HRL12330WG has a maximum charge current of 33.0A, a maximum discharge current of 800 A, a short-circuit current of 2386 A, and an internal resistance of 3.50 mΩ. At 25°C, the float charge voltage is 13.5 to 13.8 Vdc/battery, and the equalize charge voltage is 14.4 to 15.0 Vdc/battery. The terminal is an I2 threaded lead alloy type, accepts M6 bolts, and the recommended torque is 51.7±10.3 Kgf·cm, 44.9±9.0 Lbf·in, or 5.10±1.0 N·m. In terms of dimensions, the battery is 324.7±2.5 mm long, 169.0±2.0 mm wide, and 213.6±2.5 mm high, weighing approximately 29.60 kg. The case is made of PP (UL 94-HB) material, and a flame-retardant (94-V0) version is also available upon request. Operating temperature: nominal 25°C, discharge range -15°C to 50°C, charge and storage range -15°C to 40°C. At 25°C, self-discharge is less than 10% after 90 days, and it can be stored for 6 months; it must be fully charged before use. If the storage temperature exceeds 25°C, charge it in advance. Under 25°C float charge conditions, the HRL12330WG has a design life of up to 10 years, meeting the Eurobat long life standard (greater than 12 years at 20°C, Very Long Life). The product is manufactured according to IEC 60896-21/22:2004 and is recognized by UL1989 (MH14533). Its official application area is data center uninterruptible power supply (Datacenter UPS), suitable for float backup scenarios requiring high power output.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...